ANTOP Smartpass Amplifier TV Signal Booster for Any Non-Amplified TV Antenna, Built-in 4G LTE Filter & High Gain & Low Noise, Included USB Power Adapter and 5ft USB Cable
Thumbnail 1

ANTOP Smartpass Amplifier TV Signal Booster for Any Non-Amplified TV Antenna, Built-in 4G LTE Filter & High Gain & Low Noise, Included USB Power Adapter and 5ft USB Cable

3.2/5
Product ID: 101952109
Secure Transaction
Frequently Bought Together

Description

  • 【DELIVERS THE CORRECT RANGE FOR YOU】ANTOP exclusive technology- SMARTPASS AMPLIFIER allows easier adjust the balance between short and long range reception.Switched ON to boost weak signal reception and switched OFF to avoid overload signal reception.
  • 【AMPLIFIED CLEAR CIRCUIT TECHNOLOGY】 Deliver more range and crystal clear picture, reduce signal dropout and pixelation.The amplifier / booster can enhance the signals weakened by the obstructions between you and the towers.but can not add signals.
  • 【SHIELDS AGAINST INERFERENCE】Build in 4G LTE Filter,blocks 3G and 4G wireless signals for clear smooth pictures and stable channel reception.Bringing you a no-noise and no-flash TV viewing experience and into a real family paradise.
  • 【EASY INSTALLATION IN ONE MINUTES】3ft and 0.3ft extension coaxial cables are attached at either end for easy connection. Smartpass amplifier must be powered to function. Unit can be powered via the included USB cable by connecting to any USB power adapter supporting 5V output on USB-port.
  • 【NOTE】We do NOT recommend to use this amplifier / booster if your house is very close to the broadcast tower and the signal is already very strong. A booster will cause self-oscillate and you may get fewer signals than without.Antenna effectiveness is also influenced by its distance from the signal origination point, station signal strength level, building construction, antenna positioning, reflections from nearby structures and any power consumption sources.

Tips 1.AT-601W must be powered for function. It can be powered via USB cable by connecting to any USB-port supporting 5V output. A USB AC/DC power adapter is included in package. 2.Re-scan the channels after each switching of the Smartpass Amplifier. 3.Scan channels monthly to find all available channels including newly added or changed. 4.Do not place or hide the Smartpass Amplifier in/behind any metallic objects. 5.Keep the antenna away from any high power consumption devices to avoid interference. Product Information Power Supply: DC 5V/50mA Size: 2.90x1.26x0.70in TO TV: 3ft Extension Coaxial Cable Attached with F-male Connector TO Antenna: 0.3ft Extension Coaxial Cable Attached with F-female Connector Frequency Range: 87.5-700MHz Receiving Range: FM/VHF/UHF Gain: 16dB Max Impedance: 75Ω Noise figure: ≤2dB Power Supply: DC5V/50mAWhat’s in the box 1* AT-601W Smartpass Amplifier and Power Supply Kits 1* 5V USB AC/DC Power Adapter 1* 5ft USB Cable 1* Instruction/User Manual

Reviews

3.2

All from verified purchases

V**T

Not sure it's needed

Purchased this amp to add to an unamplified Antop indoor antenna to see if it made any difference in signal strength. While slightly better on some weaker stations, it made far less difference than I had hoped. While it appears to be decently made, I question how slim the 75 Ohm cable is that comes out of the unit and goes to the TV. It can't have much shielding, which makes me wonder if that's why the reception is only marginally better on just a few stations. It should be shielded as well as the cable that came with the Antop antenna that this amp was used with. And even that cable I found problematic with regard to interference, but at least it had some shielding.

L**A

Sadly did not work

I don't know why but did not work for me. This kind of equipment may or may not work. What works for one may not work for someone else. I did get by the time promised.

L**E

not as good as the one that came with my antenna

I bought this to replace an amplifier that came with my antenna but got damaged. In the exact same application this amplifier gave me 12 channels, but the original one that came with my amplifier gave me 23. So, not as good as my original but slightly better than using my antenna un amplified.

K**D

Mmmmmnnnaaaahhh. Not much different to UHF low band. Marginal.

Marginal effect on VHF low band channels 2 - 6.

I**V

Simple and perfect

Works like a charm

M**.

Didn't work for me.

Had no effect. The amp showed no gain on my signal meter. LTE interference remained. Useless.

M**.

Bad purchase

Does not work as described

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Currently out of stock

Indiastore

Sorry, this item from our India store is out of stock. We're restocking soon—check back or contact support for similar products.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Antop Smartpass Amplifier Tv Signal Booster For Any Non Amplified | Desertcart INDIA