RZX 16" RIVET NUT TOOL Hand Blind Riveter,RIVNUT Riveting Tools with Nut Setting System M3 M4 M5,m6,m8,m10 M12, 10-24, 1/4-20, 5/16-18,3/8-16,totally 11 mandrels+110PCS Rivets Nuts (17" RIVET GUN)

I had to install 12 rivnuts in the bed of my Ram for a new hard top but I had no anchoring points. The new cover came with them but I had no way to install. Then this wonderful tool was delivered to my home by the gods. Soooo easy to install 12 M6 nuts and get those brackets anchored into place. I read the reviews and if you us it right you should get many years of service. You can over pinch them and somethings gonna break folks, usually the tool. Practice on a few in sheet metal so your ready to play.

I only used the 10-24 bit so far. I learned a big lesson and had to order a new bit. I broke the first one because I over tensioned the rivet nut. You do need to drill hole proper size and not try to over compress rivet to make up for a poor drill hole size. That was part of my problem other one is do not try to bend the metal you are riveting too because you see a bend in it before removing the tool. The bit ended up breaking off with the side ways stress.. This is a good tool and will help you do a good job once you figure out how to properly use. The instructions are way too small for a 74 year old's eyes to read, but the online video is plenty good. Its pretty quick to change size bits too.

Works just fine, Price is okay. Thanks

It works perfectly, as long as there is clearance for the length of the tool and the hole not close to a tubing side wall. Found out the hard way through experience. Comes with a big assortment of rivnut inserts both SAE (English thread) and METRIC. I had to by more 3/8 rivnuts to complete my job. I was able to install 4 camper trailer fresh water tank holding straps with brand new threads and stainless hardware using this RIVNUT installer under my camper. There was just barely enough room to use it.I installed 16 rivnuts into the locations that previously had self tapping screws that had failed and stripped 5 screws of 16 ). It took a few hours of supporting the tank, and drilling out the stripped holes, enlarging the strap holes a bit, and installing rivnuts for each strap. But the repair is excellent , and will last forever, and I can now easily remove or replace the straps with regular bolts. No more self tappers. Replacement on the tank in the future will be easier.It works great with ALUMINUM RIVNUTS, however it is VERY nard to use with 5/16 and up STEEL RINVETS. I don't recommend STEEL RIVNUTS for use with this tool, unless they are for smaller fasteners

This is the only rivet nut tool I've ever used so I can't compare this against anything else. I'm just a guy who wanted to mount things to the legs of a table at home. Hollow square tube, thin enough gauge that self tappers wouldn't be much good. I tried to DIY the nut installation and found that too difficult. So I bought this tool based on price, reviews, and supplied tip sizes.The grease smells funny, the collar nut has some wicked burrs, and the instructions are minimal.It is perfect for my homeowner level of need especially at this price level. If you are sure that you need to use a rivet nut then just buy this tool and keep your job simple. 10/10 glad I bought this.

Very sturdy and easy to use.

The best selection of tips all the way up to half inch and 13 mm so my other one that didn't have but five different tips got this one same brand Works wonderful.

Really functional nutcert tool.