ASGYISA Semi Flush Mount Modern Ceiling Light Fixture， 6 Lights Black Vintage Matte Sputnik Chandelier Ceiling Lamp with E26 Bulb Base for Farmhouse Dining Room Living Room Bedroom Study Kitchen

I like this fixture as i purchased for my low basement family room ceiling. The put together was a little confusing but I managed. It is sleek and stylish. I used 40 watt bulbs as the max wattage is 60 -40 is pretty bright. For the price a nice buy

This is a really cool light fixture! I installed it myself- if you are not comfortable with installing basic lighting I would not attempt it. It involves tying together six wires from the light itself to the live wire in the house. They give you orange wire, nuts, but I suggest using the larger red ones. Keep in mind you have to wrap six wires together twice if that makes sense. The black , load bearing and the white it does mount to the wall pretty flimsy in my opinion, but as long as you don’t play with it it’s not going to go anywhere. I oriented mine so that each set of the same height or parallel to each other facing away from each other. I really think it’s a nice light and well worth the money especially if you can do it yourself. I’ve attached some photos.

Great fixture! Yes, you have to assemble the product and play around with the orientation of the parts to get the look you want but it’s fairly simple to do if you just study the instructions. The instructions are not great but if you look at the pictures you can figure it out. Each piece is screwed into the protective cover plate and then you connect the white wires and black wires together and it’s ready to hang. Comes with a pre installed grounding wire and a green ground screw to screw into the mounting bracket.I went with the silver finish to match other fixtures in my home and will get some Edison style bulbs.A couple tips for anyone looking to buy this:1) get larger electrical connectors. The ones including were too small and when you are connecting 7 wires together you will need a larger wire connector.2) it comes will a few pieces of black heat shrink tubing. Use it! Or electrical tape. It helped keep all the wires manageable when installing and helps them to sit into the cover plate so you get a nice clean flush mount look on your ceiling.3) there were a bunch of extra pieces and parts I did not use. Looked like extra hardware that I did not need so don’t feel like you need to use every piece it comes with.4) it’s smaller than it appears in the stock photos from the listing. I believe it’s only 16” at its widest. That was fine for me but it definitely is smaller and I would not recommend you buy this if it’s going in a super large room. I put it in a dining room that’s roughly 11’x14’ and it looks fine.

This light is nice looking and very bright. Perfect for a dark room. The only thing I struggled with were the assembly instructions. The wiring & instilation was easy!

This was a bit smaller (visually) than I expected, but it does match the listed measurements. It works perfectly in my small dining room and actually gives off a good amount of light, like we had to dim the lights because it was almost too bright. This really opened up a small room. Easy to assemble, easy to install, easy to find bulbs for it.

So modern and beautiful! Also it was very easy to install!

Love this design. Replaced an old "boob" style light and man did this not only completely change the feel of the space, but it is so much brighter. Can't go wrong and it is about half the cost your big box stores

This light fixture is essentially impossible for even a fairly handy homeowner to install as-is. I recently installed a complete wiring system in a car, and *I* had trouble with this.The issue is trying to hold the fixture near the ceiling while simultaneously twisting the two sets of six lamp wires with the supply line into wire nuts. Guaranteed that even if you have three hands, at least one of the wires will, unnoticed, slip out of the bundle in the wire nut so that not all of the lamps work. If any of them are on the hot side, it can be hazardous if your ground or circuit breaker aren't working.I resorted to soldering the sets of black and white lamp wires with matching pigtails on my workbench, sealing the joints with heat shrink tubing. Then I used a long zip tie to suspend the fixture from its mounting bracket on the supply box so that I had two hands free to connect the pigtails and the ground into the circuit box.It now all works, and it looks good, but be forewarned if you like this fixture, it's a frustrating project to get it installed.