Tosuny for 7 inch Touch Screen with Protective Case, 1024x600 HDMI Display IPS Touch Screen with Bracket for Raspberry Pi(Plastic Bracket Case)

Not as nice looking as I'd hoped and one of the pieces was broken so I've never used it, couldn't be bothered to return it.

Overall it's a nice product.nice plastic and surprisingly strong build.Downsides :-No instructions, I had to figure out which way around the panels were fitted and what screws to use.You need to build the whole thing in two sections.The back panel has the feet fitted first then a backing panel goes onto that. only then can you screw the feet onto the two back panels together.Once done, then place the screen into the two narrow panels.sandwich the whole lot together, then use the four NARROW screws and slide fron the front narrow panels through the screen holding brackets and through the back two panels. then put the NARROW nuts on the back and screw the lot together.i.e. the screen sits in the middle with two panels in front and behind making a sandwich construction.

Frame says it was for the screen I have, however, front two bezels where about 2mm out and broke whilst fitting, also no gap on rear parts for the audio jack. Luckily I had a couple of spacer to make it work. As was bought with vouchers didn't see the poi t in returning.

IT IS NOT PLASTIC - it is some wood pulp or paper laser cut thing. ALSO there is NO SCREEN. Look at the title, it says "FOR RASPBERRY PI 7 inc Touch Screen with protective case, 1024x600 HDMI Display"Where is the display? It says IPS, plastic on the ad, it is NOT plastic.

It is advertised as for the raspberry pi 7inch screen but this doesn't fit. This seems to be more 3:4 whereas the screen is 6:9.Returned and refunded