Deburring External Chamfer Tool, with Tungsten Carbide Blade, Deburring Chamfering Drill Bit, Remove Burr Tools Quick Release Hex Shank. Improved Durability and Sharpness. Fits 1/8" to 3/4".
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

Deburring External Chamfer Tool, with Tungsten Carbide Blade, Deburring Chamfering Drill Bit, Remove Burr Tools Quick Release Hex Shank. Improved Durability and Sharpness. Fits 1/8" to 3/4".

4.4/5
Product ID: 451794281
Secure Transaction
Easy EMI available

Details

  • Material
    Tungsten
  • Shank Diameter
    19 Millimeters
  • Cutting Diameter
    0.75 Inches
  • Shank Type
    Hex
  • Brand
    XPECIAL
Quick release hex shank
🔧Tungsten carbide blade
⚙️Fits 1/8" to 3/4"

Description

🔩 Transform Your Tools, Transform Your Work!

  • SPEEDY OPERATION - Optimal performance at less than 500 RPM for quick fixes.
  • EFFORTLESS PRECISION - Easily shaves down flatted bolt edges with minimal effort.
  • UNMATCHED DURABILITY - Carbide cutting edge ensures longevity and maximum efficiency.
  • UNIVERSAL COMPATIBILITY - Quick release design fits most drills for versatile use.
  • CUSTOMER CENTRIC PROMISE - Dedicated support for DIY enthusiasts and professionals alike.

The Deburring External Chamfer Tool is designed for quick and efficient deburring of flatted bolts. Featuring a tungsten carbide blade for enhanced sharpness and durability, it fits a range of drill sizes from 1/8" to 3/4". Its quick release hex shank ensures compatibility with most drills, making it an essential tool for both DIY enthusiasts and professionals.

Large manufacture image 1Large manufacture image 2Large manufacture image 3Large manufacture image 4

Have a Question? See What Others Asked

Does it work on stainless steel bolts?
What diameters will it fit?
How durable is it? Will it last?

Reviews

4.4

All from verified purchases

L**I

Worked better than expected

Have seen all the videos and reviews, so hoped it would work, and it did. Used for multiple bolts on a hot rod fabrication. Used on 3/8 stainless threaded rod to hold in a gas tank. Deburred the ends without a problem and the bolts threaded on without a problem afterwards. Used on grade 8, 5/8 inch U bolts after they were cut down for a rear end. Worked effortlessly on those also. Used on a few other bolts during assembly also, and did not have a problem with the tool working as it should. Just to note, you will need a vise to hold the item while working on it, don't expect to just hold the item by hand and it to work. You need to apply a bit of pressure to it as it cuts. But it will do the job and do it well. Will definitely not be without one in the future, and will probably order an extra just in case one gets misplaced.

A**R

Works as expected. Clean.

Very good clean cuts on a 1/4x20 all thread. Easy to use, easy to put the nut on the cut and cleaned bolt.

D**N

Pretty good, but not great for smaller screws

This tool says it'll go down to 1/8" / M3 screws, and I can believe it, but there's no reasonable way to get a typical-length screw that small up into the tool. And if you can't hold the small screw securely, there's a good chance it will bind or catch in the tool.Wish I could get a version for small screws only. Would save this tinkerer some time at the bench grinder.

D**B

Yes sir

I've rounded out numerous bolts and studs I've come across over the past year and haven't noticed any real wear. I use decent pressure on said stud and go nice and slow. Sometimes you need to start fast to knock off a bit and do some pecking.I bought this due to the advertised tungsten material.. I have no way to test this and determine or care to do so. But this item definitely works and has paid itself off. I'd buy it again if needed or I'm considering getting a larger one too because any sort of small piping etc. It's a treat to give it a nice finish afterwards . This is great for cutting wheel studs as well

R**T

I think it was used...

It works ok on stainless all-thread. Very disappointing to get a "new" product and it has some sort of adhesive on the side where either a sticker was or it was stuck to something. There are scratches all over the outside and inside and metal shavings inside. Under the scratches it looks brass... not sure it I would trust this product on more than a few uses.

A**R

Must have in tool

works great to clean up the end of bolts after cutting. A quick zip and your threads are perfect! I used this tool to clean up the end of a few hundred bolts and it still works great. This is a must have tool when trimming bolts.

G**2

It really does work

Have you ever had to trim a bolt because it was too long and sticking out too much or hanging up on things? I usually put the nut on, trim the bolt and use the nut to straighten out the threads. Sometimes that works, other times it’s still a pain. Anyway, this chamfer tool does make a difference. I don’t use the nut anymore and the installation of the nut is pretty easy afterwards. Well worth it.

A**R

Exactly what I was looking for

Being an electrician, cutting all tread rod and and adding hex head nuts, can became frustratingI saw this tool and man oh man, doing that as the pictures became so easy to work now!100% recommended!!!

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
₹ 2394

Duties & taxes incl.

Indiastore
1
Free Shipping

with PRO Membership

Delivery Partners: Shadowfax, Delhivery

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction
Easy EMI available

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Pooja R.

The customer service exceeded my expectations. Perfect for buying products you can't find elsewhere.

1 week ago

Deburring External Chamfer Tool With Tungsten Carbide Blade Deburring Chamfering | Desertcart INDIA