Epoxy Putty, 200g Fast Repair AB Epoxy Putty, High-Strength Two-Part Filler for Metal, Wood, Tile, Ceramics, Multi-Purpose Sculpt Clay for Bonding, Repairing, Sculpting (White)

Wear the included blue gloves. This epoxy is not toxic but it's sticky and gooey and you'll have a tough time getting it off your hands! Part A is the most messy, but cutting off an equal part of Part B you can squish them together pretty well with the gloves (although it will try to stick to the gloves too.)I've had this life-sized head on a neck and base that needed improvement, sitting on a shelf with about 10 others in various stages of completion, so it was time to do something about it and find out how this Boncart epoxy works. I decided to change her top lip, move it up, and make her a happy grin instead of the more neutral expression she had. Cutting it out and digging enough space to raise the top lip, it was time to mix the epoxy putty to hold everything in place. These heads are mostly paper and glue on solid wood armatures, so the epoxy has something to grab on to because it's solid material that takes the most time to cut through. Epoxy has to be completely mixed and will harden with Approximately Equal portions. It doesn't have to be exact, but BETTER IF IT IS. The mixing is more important. After putting the 2 chunks of sticky stuff together you can work them into a ball, then flatten the ball, roll it up and turn it into another ball. It takes about 30 minutes to start to harden, so you have the time to mix it like that until it HAS to be uniform. 5 minutes isn't too long to mix because if it fails it's BECAUSE you didn't mix it enough. Some of it on the inside cavity below the nose and some on the upper lip and pushed in and up, remembering the top lip will come out just a little more forward. Some of the epoxy becomes the now visible teeth under the upper lip. I don't worry about details, just the big features. Later on when it's hardened it can be carved, rasped and ground to shape. The epoxy is bright white and it can be spread quite thin with the nice flat tool with the triangular sharp edge. The tool is a good one, flexible and light that makes moving the stuff around easy and making sharp edges in the epoxy, separating it into small parcels to be spread out.>>>It would be nice if the 2 parts each came in a SEPARATE color so mixing it would clearly show any non-mixed parts.<<<There's even a few pieces of rough sand paper discs for smoothing the hardened surfaces, but I've already got that covered. This kit is for doing it without any other tools, just what comes in the box. When you open the parts A & B there are extra plastic bags to wrap them back up. It might not dry out for a long time and still be good, but you don't want dust and other things to get into the mix. Remember, IT'S REALLY STICKY & GOOEY!(The Next Day) Epoxied areas are hard and smoother than they were. The epoxy sort of glazes over as it sets-up. This might not be good if you wanted some surface roughness or texture, but in this case it's mostly structural and will be covered by layers of thin paper/glue as required. Each of these heads has an expression and those that are successfully completed and good enough get sealed with acrylic or varnish and used to make a mold.

Bottom line: This is a great product and priced fairly (around $10 when I bought it). I trust you'll be pleased as well.More detailed version: I'm extremely pleased with this product, and I am going to start making sure I always have some on hand for repairs. I've used it for both outdoor repairs and indoor repairs, and ranging across material types, and each time I've been very pleased. It functions as described. It gives a very durable bond, and is relatively easy to use. Depending on the nature of your repair, you will need patience and some fine-point tools (e.g., I did a very detailed repair of a ceramic item that had shattered, requiring a stepwise repair and recreating surfaces that had been ruined), and I do recommend wearing gloves when working with this (the vendor includes a pair, but you might want to just buy a box of disposable gloves). One other tricky part is the compound can start adhering to the gloves a bit, which can make manipulation of the compound a bit more difficult as you continue to work with it. But it's hard to complain about that, because it's hard to envision what could be done to offset that. Again, this is a great product, and I'm sure I'll be buying it again.

I bought this product to repair a rusted section of a metal outdoor table. The color matched perfectly and the repair was easy to do, and did a great job! Highly recommend!

It worked very well with my stove top repair chip

Used this epoxy to repair a carry on luggage shell that cracked at the wheel bracket. This worked great! Set quickly and hardened up nicely. The color is just as shiny as the shell so you can't even tell that there is epoxy there. Great buy.

Easy to use. Conveniently comes with gloves to use. Easy to mix. Seems very hard and durable after it cured. Did the job.

Great for non-wood things. Fries pretty rough and it’s incredibly hard to sand. If you need something strong and sturdy and are not concerned with appearance- this is good.

I purchase several things on Amazon and was giving pretty in-depth reviews. From this point on, here's the new agenda…. if it works as advertised, is well made, meets or exceeds the description, is a value, and arrives in a fair amount of time, it will get a "star rating" equal to what my expectations were/are. If it doesn't meet these criteria, then I will most definitely and descriptively tell the short comings of the products and you as a consumer will not have to go through the trouble of buying the product without some background knowledge. If the sell pulls that item and relists under another description, I will put the exact same review on the seller's feedback page. Sellers have done this a couple of times in the past, and I was true to my word then as well as now. DR