Ball Lock Cornelius Beer Keg Line Assembly – 3/16 x 40in Tubing, Picnic Faucet, and MFL Liquid Disconnect - Preassembled

Works ok hard to clean

It’s average, dose the job

I think that the tubing provided is the wrong size (too large) for the fittings. It leaked badly until we put on some hose clamps. Now it leaks (drips) from the valve, so must disconnect when not in use.

The hose is the wrong diameter, so when I first hooked it up, beer sprayed out around both hose ends. I tried to tighten the hose clamps, but the tube is a very hard rubber and hose clamps are poorly made. both hose clamps broke before they could be tightened enough to stop the leaks. I ended up replacing the hose and hose clamps. the actual fittings worked well though.

I had leaks no matter what I tried. I changed out the black ball lock fitting for one with a larger connector and it works fine. The hose supplied is one size too big for the connectors.

I tried various things, tightened the nob as best as I can and had to turn my CO2 pressure down to 1 psi (as opposite to 4 I usually do) to get it not spewing out from the connection.

I wish I would’ve read the reviews. The items are defective out of the package. Both the ball lock and picnic tap leak from the housing upon connecting to the keg. The hose is not secure on the barbs causing the beverage to spray everywhere.

This product did not work very well. The clamps were hard to make tight enough to hold pressure, and the quick disconnect leaks. On top of that, when the tubing gets cold, its almost impossible to bend.