3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs

3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs

Q: My arcade power supply is 16a 110w 110/220v. someone said they used this for 1up arcade so guessing this will work?

15 Amps must be the DC output. 110W @ 110v is 1 Amp AC input. This will work well. If that is all that is connected you should change the fuse to the rating recommended for the power supply (3 amps maybe).

Q: does the light on the toggle switch light up for 120v? I've heard thats a problem with others, that the light is 250v so it doesn't work with 120v

Mine works just fine at 120 volts.

Q: This comes with 18 ga wires. My project requires 14 ga so i plan to replace the wires. But is the internal wiring of this switch compatible?

You would need to research if 15amp 250 volt should use 14ga wiring. I believe the internals are just plate metal with soldered connections and not wiring. Logic would say if you are running less than 15 amperage and less than 250 volts, you should be fine. Most American stansard outlets are 110-115 volt, but what amperage are you pulling. You'll have to answer that. Again....this is just a best question with information given. Good luck.

Q: Can a higher amp fuse be used in place of the included 5 amp fuse? I would like to use a 6 or 8 amp fuse.

The switch itself is rated for 10 amps @ 125 VAC or 6 amps @ 250VAC. That is why they included a 5 amp fuse. So depending on your input AC voltage no higher than a 9 amp fuse on 125 VAC for safety factor. If you push the rocker switch out of its mount, you will see its ratings molded on the side. If this were just a power socket with no switch then it could handle 15 amps. The switch is the deciding factor here.

Product ID: 132023903

Secure Transaction

Details

Operation Mode
manual
Current Rating
15 Amps
Operating Voltage
250 Volts
Contact Type
Normally Open
Connector Type
Plug In
Brand
3Dman

⚡10A fuse for reliable power

💡Illuminated rocker switch for power status

🔌Standard IEC320 C14 3-pin plug

Frequently Bought Together

3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs

Amazon Basics PC Power Cord, 6 feet, AC Power Cord for Monitor, Computer, TV, 3 Prong, 18 AWG, 125 Volts, Black

Description

⚡ Switch on safety, switch up your setup!

PLUG PLAY READY - Pre-installed 18 AWG wiring and IEC320 C14 inlet for instant setup.
COMPACT VERSATILE - Slim 5.8 x 4.8 x 3.4 cm design fits seamlessly into any DIY or professional setup.
VISUAL POWER CONTROL - Illuminated rocker switch clearly shows ON/OFF status at a glance.
POWER WITH CONFIDENCE - Built-in 10A fuse ensures safe, uninterrupted current flow.
TRUSTED COMPATIBILITY - Perfect for 3D printers, computers, and home appliances—power your projects with ease.

The 3Dman 15A 250V Rocker Switch Module combines a robust 10A fuse with a standard IEC320 C14 3-pin inlet and an illuminated rocker switch, delivering safe, convenient power control. Pre-wired with 18 AWG cables and compactly designed, it’s ideal for 3D printers, computers, and DIY projects requiring reliable power distribution and clear status indication.